Commercial range

Diesel Static

In certain circumstances and if site services are limited, a three-phase supply is simply not possible or cannot be of the size required for some of our more powerful high temperature, high flow all electric products. In these situations, our range of diesel statics will fit the bill. We can offer unlike most 150-bar units without the need for a three-phase supply, single phase, 25 amp only required. If a diesel heated unit is your preferred choice, then our range covers all the requirements you need. These machines are still of the extreme reliability and build quality of our electric models and have more safety features than most of our competitors in the field, making them the strongest diesel units on the UK market.

Robust stainless-steel 2-point lockable cabinet
Durable 316 brushed stainless steel switch panel IP68
Word renowned high pressure Cat pump
High pressure chemical output with variable control
RCD safety system, PLC controlled computer system
Total frost protection available with auto blow down

All static cabinets have two-point locking systems with interlocking hinged lids. They are acoustically foam insulated providing additional protection against the elements and surrounding areas for operational noise. Official tests confirm they have neutral to no impact on surrounding noise levels, making these units suitable for the most built up or close residential area placement. Fitted standard with internal frost protection heating and feed line protection, they are suited for all environments. This equipment is fitted with WRAS approved valves, components which complies with backflow prevention laws and have water storage tanks manufactured with type AB air gaps, overflows and weirs.

All diesel units are available in single and three phase, can be custom-made to any customer’s requirements. If there is a need for something not listed, please enquire and we will be happy to accommodate and customise a unit to meet your specification. We produce these units in 316 brushed stainless-steel finish or 304-grade mill-finish stainless steel, which are then powder coated to give their robust build, finish and appearance.

We offer a large inbuilt chemical storage tank, combined with being fully electric gives you an all-in-one secure wash system. Eliminating issues such as fuel and chemical storage, handling, and theft from site. The Night Time Security function locks off the control panel, set timings requested by the site will stop any unauthorised use of the equipment, giving the owner, operators complete peace of mind. These features provide additional health and safety benefits.

We can offer any Ral colour of powder coating or polished finish stainless as required*.
Custom Vinyl graphics to suit your business branding are available, this can be supplied by the customer or drawn up by our design team and applied to your equipment**

Our Static Range consists of:
Hot Static All Electric Stainless-Steel Pressure Washers Units
Hot Static All Electric Utility Stainless Powder Coated Pressure Washers Units
Hot Static Diesel Heated Stainless-Steel Pressure Washers Units
Hot Static Diesel Heated Utility Stainless Powder Coated Pressure Washers Units
Plant Room & Bench Build Installations
Wash Bay Overhead Boom & External Control Installations

Plantroom Installations

Complete plant room installations are available with overhead swinging booms arms and external controls. These configurations are popular in large car auction and motor dealership sites where they have spacious sites for purpose-built plant rooms to house the machinery. High-pressure pipework or hoses and cabling are run out via stainless steel trays to the external wash bays areas. These units are controlled generally by pillar-mounted simple robust external control panels, making for extremely easy operation. Staff can be regularly relocated to other sites, so only basic training is required to operate.

For continual use throughout the year, compressed air blowdown systems are fitted to this type of build, ensuring in the winter months and minus temperatures the operation is ready for use at the start and throughout each day. All units are built with quick screw connections allowing easy removal and storage of the high-pressure hose and trigger gun assembly.

In certain environments mainly food manufacture, high temperature water above 65 degrees and fully stainless-steel equipment is a requirement. The high temp units are perfectly suited for this type of businesses, with the added benefit CBD – Compressed air Blown Down, you can ensure and eliminate any risk to the water storage system or lying water in pipe work, outlet hoses, trigger gun and lance assemblies, ensuring operator and hygiene safety.

Our Static Diesel Standard Operational features

TFP/FLP - Total Frost Protection

This feature protects all internal parts from frost and leaves them to operate in temperatures as low as -15°C also incorporates a very clever feature, FLP

TFP/FLP - Total Frost Protection

TFP. This feature protects all internal parts from frost and leaves them to operate in temperatures as low as -15°C also incorporates a very clever feature, FLP

FLP - Feed Line Protection

FLP stops your mains water feed pipe to the machine from freezing allowing you to use the equipment in the worst winter weather conditions

NTS – Night Time Security

NTS allows the user to decide what time of the day operators can use the equipment with timed controls that stop the control panel on the front of the machine from being operated outside of the selected hours

ATS – Auto Timeout Stop

ATS turns the machine off after a set period of no use time to give longevity to the consumable items within the machines, for example high pressure pump seals among other parts

LPD - Leak Pulse Detect

LPD will turn off your machine when there is a leak in the system, bad enough to allow the machine to run on beyond its normal ATS setting

FOTC – Flame & Over Temp Control

FOTC stops the machines hot water generating boiler equipment from becoming over-temperature to prevent damage to the heating coil, inner lid assembly integrity and high-pressure fittings

TFP/FLP - Total Frost Protection

This feature protects all internal parts from frost and leaves them to operate in temperatures as low as -15°C also incorporates a very clever feature, FLP

FW – Fuel Warning

FW alerts the user that the fuel level is running low. This is a visual warning from the LED light on the button control panel of the machine which flashes intermittently making the operator aware of this. An audible warning can be added, activated when pressing for heated water function

RF – Real Flow

RF monitors the flow of liquid through the high-pressure pump and controls if the machine is to stop from ATS function

SM - Sleep Mode

SM shuts down all the power consuming items in the machine if there has been no use for an hour. This timing is adjustable to minimise power consumption

WM - Wake Mode

WM will awake the machine at a set time in the morning prior to the operators using it which will ensure the machine is at the correct working temperature and all systems are ready for use

WW - Water Warning

WW alerts the user that the mains water supply to the equipment has been turned off and has been for thirty minutes or more

Diesel Static Model Specification

All diesel units are available in single & three phase or can be custom made to any customers requirements.
*Minimum quantities are required for this service
**Additional cost for this service, quantity dependant.

key
features

Robust stainless-steel cabinet
2-point lockable cabinet
Durable stainless steel switch panel
Word renowned Cat Pump
High pressure chemical output
Variable chemical control
High pressure standard rinse
RCD safety system
PLC controlled computer system
Total frost protection
Feed line protection
Water warning
Real flow control
Leak pulse detection
Adjustable external temperature control
Flame & over temp control
Fuel warning
Night time security

Optional
features

TASS – Timed Auto Stop Start, has the same features of ATS but the machine can be restarted by simply pulling the trigger of the high-pressure trigger
CBD – Compressed air Blown Down – Air compressor fitted which blows water from lines leaving them free of liquid. Especially useful on hard piped and wash bay applications where removing the hoses at night is not an option
RC – Remote Control – If it is not possible to reach the machines control panel when working in certain environments
POS – Point Of Sale – If the user requires payment before the machine can be operated. This is in the form of a contactless card reading device which accepts, cards, mobile phone and watch payments etc. Can be configured to take pre-paid fobs, if you have accounts, fobs can be issued to operators with pre-loaded credit that can be assigned to vehicles, groups or only one machine to limit any misuse. Reports can be downloaded or viewed via online portal
Twin pump
150L Inbuilt chemical storage tank
Waxing pump
Short reach easy handle high pressure lance
Bespoke custom branding
Heavy duty ground safe
Led advertising screen
Energy saving flood light

technical
specifications

Specification shown for 150 bar 13L/min models

Voltage: 230v Single Phase or 415v Three Phase
Operating Pressure: 150 bar (230v) or 150 bar (415v)
Output Temperature: 0 – 95°C Variable
Operating Temperature: -20°C to 70°C
Water Output: 780 LPH
Water Tank Capacity: 65L With type AB air gap and weir
Fuel Tank Capacity: 105L
Heating Capacity: 15 LPM Diesel boiler
Chemical Output:: 0-0.6 LPH
Inbuilt Chemical Tank Capacity: 150 litres
Machine Dry Weight: 220 kg
High Pressure Hose: 10m (standard)
High Pressure Nozzle Size: 1505
Installation Specification: See our downloads section